[RocketsNW] Fins on a Minimum Diameter

[Angela "Red" Wright]

That's why God made Rocket Shops, so we can go outside into our own heated and air conditioned with Microwave, shop (sorr boys no urinal yet) and build and slop whatever we want whenever we want and then as everyone knows, we can have dinner on the dining room table and not have the place smelling like epoxy or paint.  :) 

Right guys???  No building in the house! :)  

Angela Dinese Wright 
425-443-5049
Angelawr at wrightholdings.com

-----Original Message-----
From: rockets-bounces at rocketsnw.com [mailto:rockets-bounces at rocketsnw.com] On Behalf Of Christopher Guenther
Sent: Wednesday, February 03, 2010 1:57 PM
To: Mfreptiles at aol.com
Cc: jman13 at gmail.com; rockets at rocketsnw.com
Subject: Re: [RocketsNW] Fins on a Minimum Diameter

Personally I take the table cloth off the table and set it aside.  Then
cover the table with Freezer Paper and tape it down so I do not get any
epoxy drips onto that beautiful wood finish I paid so much for.  That is
where I have built all my rockets.  My wife knows I use the table and the
oven but yes I always make sure she is out of the house when I do it, she
used to complain about the smells I was making with the epoxies and
paints(not the air).

Chris Guenther
NAR L2



On Wed, Feb 3, 2010 at 1:07 PM, <Mfreptiles at aol.com> wrote:

> I know that clean/smooth PVC pipe does not adhere to JB Weld.  A few  taps
> with a hammer releases cleanly.
>
> Mike F.
>
>
> In a message dated 2/3/2010 12:22:48 P.M. Pacific Standard Time,
> jman13 at gmail.com writes:
>
> Should I  worry about PVC adhering to epoxy? How about  JB
> Weld?
>
> _______________________________________________
> Rockets mailing list
> Rockets at rocketsnw.com
> http://mx1.blastzone.com/mailman/listinfo/rockets
>
>
_______________________________________________
Rockets mailing list
Rockets at rocketsnw.com
http://mx1.blastzone.com/mailman/listinfo/rockets