[ARTS] v. 1.3.1 and v.1.6.1

[Erik Hall]

Alan,

 

You will need to upgrade the firmware in your ARTS1 to v1.61, then you can
use the new DataAnalyzer with both the ARTS1 and ARTS2.

 

I have a hunch your suspicion is correct: the two version probably are
interfering with each other.

 

If you are uncomfortable updating the ARTS1 firmware, or run into any
problems, please feel free to send it to me for re-programming.

 

Thanks,
Erik

 

 

 

  _____  

From: arts-bounces at lokiresearch.com [mailto:arts-bounces at lokiresearch.com]
On Behalf Of Alan Whitmore
Sent: Monday, July 14, 2008 8:21 PM
To: arts at lokiresearch.com
Subject: [ARTS] v. 1.3.1 and v.1.6.1

 

I asked this question a while back and got no answer, but I need to try
again to see if anyone has any experience to share about this problem.  Does
anybody know whether the v. 1.6.1 Data Analyzer package will download data
from the original ARTS1?

 

          I ask because I have recently purchased an ARTS2 and installed the
v. 1.6.1 software on my computer, and now, neither the old v. 1.3.1 software
or the new software package will connect to a COM port will unload data from
either the ARTS or ARTS2.  Both software packages inform me that they cannot
connect to COM1 (or COM2, or COM3, or COM4) as soon as I start them up.  I
suspect that the two software packages are somehow interfering with each
other and I am inclined to uninstall 1.3.1 and re-install 1.6.1, but I would
like some assurance that I could get data off of my ARTS(1) if I do that.

 

Alan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mx1.blastzone.com/pipermail/arts/attachments/20080715/a44ec942/attachment.htm